The easiest way to more self-consumption.

The immersion heater 3 kw was specially developed for use with our photovoltaic power manager AC•THOR and the immersion heater 9 kw was for use with our photovoltaic power manager AC•THOR 9s. The heaters can be installed in hot water boilers and storage tanks. Due to their special design there are only very low thermal surface loads of the heating elements, which directly contributes to increase the life-span of the product.

Linear power control by Photovoltaic-Power-Manager AC•THOR or AC•THOR 9s
The desired hot water temperature can be set with a rotary knob. AC•THOR or AC•THOR 9s detects the shutdown and automatically goes into standby mode for minimum self-consumption.

A safety temperature limiter is of course integrated.

In some projects higher temperatures are desired, for example, when a buffer tank is to be charged to over 90°C. For this purpose, the immersion heaters are also available without a thermostat, only with a safety temperature limiter. To end the heating process, the temperature sensor supplied with the AC•THOR and AC•THOR 9s must then be used in any case.

Advantages

• Manually adjustable target temperature (bimetal thermostat)
• 1.5 inch standard thread
• Single-phase or three-phase
• Optionally also without a thermostat, only with safety temperature limiter

Technical data 3kW

• Heating power: 0 - 3.000 W
• Mains connection: Single-phase, Euro plug, 230 V, 50 Hz
• Protection class: IP45
• Connecting cable: 2,8 m
• Dimension (WxHxD): 88 x 88 x 518 mm